EXSTP – External Stop
Gets/sets the enable [value] of the external stop functionality.
Access: Read/Write
Category: General
Applies to: All Commander Controllers
Firmware: V301+
ASCII EXSTP
Syntax
Read
EXSTP
Write
EXSTP=[value]
|
[value] is set to: 0: External stop disabled, 1: External Decelerate-stop enabled (same as STOP command), or 2: External stop immediately enabled (same as ABORT) |
Reply
Command is accepted and executed
Read
Returns enable/disable status, 0 = disabled, 1= enabled
Write
OK
Command cannot be processed
An error message is returned. See Error Codes
Example
Read
EXSTP * Returns the external stop status
Write
EXSTP=0 * Disables the external stop function
Notes
Added with V301 firmware.
See also
System Setup, Limits/Safety Setup,
ERC, ERCD, ERCP, INP, POL, SDC, SDE, IERR, STORE