System Setup
Nippon Pulse controllers support many different methods of communication, including USB, Serial, and Ethernet. There are settings for each communication method. For more information on the settings, see the following sections in the Commander manual:
|
Command |
Description |
Available with: |
Link |
|||||
|
ASCII |
Standalone |
CMD-4CR |
PMX-4EX |
PMX-4ET |
PMX-2ED |
PMX-2EX |
||
|
DB |
-- |
Baud rate |
● |
● |
|
● |
● |
|
|
EXST |
-- |
External start enable/disable |
● |
|
|
|
|
|
|
ID |
-- |
Commander-4CR identification number |
● |
|
|
● |
● |
|
|
DN |
-- |
Device name |
|
● |
|
● |
● |
|
|
IERR |
-- |
Ignore alarm/limit flags enable/disable |
● |
● |
● |
● |
● |
|
|
IP |
-- |
IP address setting |
● |
|
● |
|
|
|
|
POL |
-- |
Input and logic configuration |
● |
|
|
● |
● |
|
|
PO |
-- |
|
● |
● |
|
|
||
|
STORE |
-- |
Save system configuration settings to flash memory |
● |
● |
● |
● |
● |
|
|
VER |
-- |
Return firmware version number |
● |
● |
● |
● |
● |
|
|
%RST |
-- |
Soft Reset |
● |
|
|
|
|
|
|
%SN |
-- |
Hardware Serial Number |
● |
|
|
|
|
|
The black dots indicate the command is available for the listed controller family.