SYNF – Synchronization mode off
Disables the synchronization output for an axis. If the synchronization window function was active, it is also disabled.
Applies to: CMD-4CR, CMD-4EX-SA, PMX-4EX-SA, PMX-4ET-SA, PMX-2ED-SA, PMX-2EX-SA
ASCII SYNF[axis]
Standalone SYNOFF[axis]
Syntax:
Write:
SYNF[axis]
|
Where: [axis] is set to X, Y, Z, U |
Reply:
Command is accepted and executed
Write:
OK
Command cannot be processed
An error message is returned. See Error Codes
Example:
Write:
SYNFX * Disables synchronization window and synchronization output on the X-axis.
Notes:
- The synchronization function for each axis is independent.
See also:
SYNC, SYNO, SYNP, SYNS, SYNWO, SYNWF, SYNMAX, SYNMIN