P – Pulse counter value (axis)
Gets/sets position [value] for [axis].
Access: Read/Write
Category: Motion
Applies to: All Commander Controllers
ASCII/Standalone P[axis]
Syntax
Read
P[axis]
|
[axis] is set to X, Y, Z, U |
Write
P[axis]=[value]
|
[axis] is set to X, Y, Z, U [value] specifies the value to command pulse counter value (32-bit number) |
Reply
Command is accepted and executed
Read
Returns the value of the command pulse counter value (32-bit number)
Write
OK
Command cannot be processed
An error message is returned. See Error Codes
Example
Read
PY * Returns the command pulse counter value for the Y axis.
Write
PX=2400 * Sets the command pulse counter to 2400 for the X axis.
Notes
None