SoftLimit Status
The SoftLimit Status screen in the Commander Control Software displayes the current settings for the Softlimits.
Enviromental settings
|
Display |
Description |
Related commands |
|
|
Button to save data in the memory |
|
|
|
Show/hide the Advanced Encoder Status Screen |
|
|
Input Settings |
||
|
Limit Polarity |
Set the input mode of the feedback pulse signal |
POL[axis] (Bit-3) |
|
Home Polarity |
Set the direction the feedback pulse count up |
POL[axis] (Bit-4) |
|
Alarm Polarity |
Set the logic of the Z-Index pulse signal |
POL[axis] (Bit-5) |
|
Soft-Limit |
||
|
Enable |
Enable/disable Soft-limit function |
|
|
Status |
Opens the |
|
|
Set |
|
|
|
Slow Down (SD) |
||
|
Enable |
Enable/disable Slow Down (SD) function |
|
|
Latch |
|
|
|
Decel |
|
|
|
Polarity |
|
POL[axis] (Bit-5) |
|
In-position (INP) |
||
|
Enable |
Enable/disable In-position (INP) function |
|
|
Polarity |
|
POL[axis] (Bit-5) |
|
Error Clear (ERC) |
||
|
Enable |
Enable/disable Error Clear (ERC) function |
|
|
Polarity |
|
POL[axis] (Bit-5) |
|
Pulse Width |
|
|
|
Off Delay |
|
|
|
|
|
|
|
|
|
|
Notes:
- Clear encoder pulse counter values – Click