ABS – Absolute Coordinate Mode
Set the position coordinate mode to absolute. Absolute position will be used for motion commands based on a zero-reference location set by a homing routine.
Applies to: CMD-4CR, CMD-4EX-SA, PMX-4EX-SA, PMX-4ET-SA, PMX-2ED-SA, PMX-2EX
ASCII/Standalone ABS
Syntax:
Write: ABS
Reply:
Command is accepted and executed
Write:
OK
Command cannot be processed
An error message is returned. See Error Codes
Example:
ABS * Positioning coordinate mode is set to absolute
Notes:
None