SL – StepNLoop Enable
Gets/sets the StepNLoop enable [value] for [axis].
Access: Read/Write
Category: Stepnloop
Applies to: All Commander Controllers
ASCII/Standalone SL
Syntax
Read
SL[axis]
|
[axis] specifies the axis to be enabled/disabled (X, Y, Z, U) |
Write
SL[axis]=[value], SL=[value]
|
[axis] specifies the axis to be enabled/disabled (X, Y, Z, U) [value] specify 0 to disable or 1 to enable |
Reply
Command is accepted and executed
Read
Returns the enable/disable status (0 – disabled, 1 – enabled)
Write
OK
Command cannot be processed
An error message is returned. See Error Codes
Example
Read
SLY * Returns the value (0, 1) of the Y-axis
Write
SLX=1 * Enables StepNLoop function for the X-axis
Notes
Joystick and buffer operation are invalid during StepNLoop operation
See also