HCA - Home Correction
Gets/sets the home correction [value] for [axis].
Access: Read/Write
Category: Motion
Applies to: 2ED, 2EX
ASCII HCA
Syntax
Read
HCA[axis], HCA
|
[axis] is set to X, Y, Z, U, or not specified to affect all axis |
Write
HCA[axis]=[value], HCA=[value]
|
[axis] is set to X, Y, Z, U, or not specified to affect all axis [value] correction is set to X, Y, Z, U, or not specified to affect all axis |
Reply
Command is accepted and executed
Command cannot be processed
An error message is returned. See Error Codes
Example
Read
HCA * Returns the correction status
Write
HCA=[value] * Set the correction status