EOP - Polarity
The EOP command gets/sets the polarity [value] for the enable output.
Access: Read/Write
Category: I/O
Applies to: 2ED, 2EX, 4ED, 4EX
ASCII/Standalone EOP global polarity setting
EOP=[value] individual axis polarity setting
Syntax
Read
EOP
Reply
Command is accepted and executed
Command cannot be processed
An error message is returned. See Error Codes
Write
EOP=[value]
|
[value] is polarity for the enable output |
Reply
Command is accepted and executed
Write
OK
Command cannot be processed
An error message is returned. See Error Codes
Example
Read
EOP * Returns the polarity [value] for the enable output
Write
EOP=1 * Set output polarity to 1