EDEC - Enable Status
The EDEC command gets/sets the enable status [value] for unique deceleration.
Access: Read/Write
Category: Motion
Applies to: 2ED, 2EX, 4ED, 4EX
ASCII EDEC
Syntax
Read
EDEC
Reply
Command is accepted and executed
Write
EDEC=[value]
|
Where: [value] is |
Reply
Command is accepted and executed
Command cannot be processed
An error message is returned. See Error Codes
Example
Read: EDEC * Returns the enable status
Write: EDEC=[value] * Set the enable status