4.3 Examples of command control from a PC
The following examples are provided to assist your understanding. Although they were produced with the utmost care, if you find any points that are unclear, wrong, or have inadequate descriptions, please let us know.
For more examples please refer to the command reference.
< Previous Chapter | Topic Home | Home | First Section | Next Topic >
This chapter is broken into the following sections and subsections;
- Start and stop of jog move
- Position Move
- Obtaining and clearing the counter value
- Homing Operation
- Linear interpolation operation
- Circular Interpolation Operation
- On-the-fly speed change
- Synchronization Function
- Control of general purpose input/output
< Previous Chapter | Topic Home | Home | First Section | Next Topic >