PWM – Pulse Width Modulation Duty Cycle
Gets/sets the PWM percentage [value] for [channel].
Access: Read/Write
Category: pmw
Applies to: 2CR, 4CR, 4ED, 4EX, CM3, 8CR
ASCII/Standalone PWM
Syntax
Read
PWM[channel]
|
[channel] specifies the PWM output (1 or 2) |
Write
PWM[channel]=[value]
|
[channel] specifies the PWM output (1 or 2) [value] specifies the on-time duty cycle in % (1-99) |
Reply
Command is accepted and executed
Read
Returns the % on-time duty cycle for the specified PWM output (1 or 2)
Write
OK
Command cannot be processed
An error message is returned. See Error Codes
Example
Read
PWM2 * Returns the on-time duty cycle value the signal is high
Write
PWM1=50 * Sets the time the signal is low for PWM output 1 to 50%.
Notes
None