Command gets/sets the polarity [value] of all digital input ports..

Access: Read/Write

Category: I/O

Applies to:  2CR, 2ED, 2EX, 4CR, 4ED, 4EX, 8CR

ASCII                        DIP=[value]                

Syntax                        

Read

DIP                

Write

DIP=[value]                 

Where:        [value] is set to 0 for negative logic (active low), 1 for positive logic (active high).

Reply 

Command is accepted and executed

Read         

Returns the value set (0,1)

Write           

OK

Command cannot be processed

       An error message is returned. See Error Codes

Example 

Read        

DIP        * Returns value for input polarity setting

Write        

DIP=1         * Set input polarity to 1

Notes

To write the value to the device’s flash memory, use the STORE command.

See also

I/O Setup, 

AI, DI, DO, DOBOOT, DOP, IO, IOBOOT, IOCFG, IOP

Commander Manual

2.1.3.2.1 High-Speed Digital Inputs