Sets the Latch enable/disable for [axis] 


Applies to: CMD-4CR, CMD-4EX-SA


ASCII/Standalone                LT

Syntax:                        

Write:

LT[axis]=[enable]                 

Where:        [axis] is set to X, Y, Z, U

[enable]      enables or disables the latching function for [axis]

               0: disabled

               1: enabled

Reply: 

Command is accepted and executed

Write:           

OK


Command cannot be processed

       An error message is returned. See Error Codes

Example: 

Write:        

LTX=1         * Enables the latch function for X axis.


Notes:

  • The LTS[axis] is read to see the current enable status. 

See also:

I/O Setup, 

LTE, LTP, LTS

Commander Manual:

2.1.3.2.1 High-Speed Digital Inputs