The JBD-50 brings each J11 pin out one-to-one to 3.5 mm pluggable terminal blocks. Terminal-block pin n of each block carries the J11 pin shown.

JBD-50 terminal

J11 pins

Signals

J2.1–J2.12

1–12

J2.1 +5V, J2.2 GND, J2.3 AX, J2.4 /AX, J2.5 BX, J2.6 /BX, J2.7 ZX, J2.8 /ZX, J2.9 AY, J2.10 /AY, J2.11 BY, J2.12 /BY

J3.1–J3.12

13–24

J3.1 ZY, J3.2 /ZY, J3.3 AI1, J3.4 AI2, J3.5 +LX, J3.6 −LX, J3.7 HX, J3.8 LatchX, J3.9 +LY, J3.10 −LY, J3.11 HY, J3.12 LatchY

J4.1–J4.12

25–36

J4.1–J4.6 not connected; J4.7 Opto+, J4.8 Opto GND, J4.9 DI1, J4.10 DI2, J4.11 DI3, J4.12 DI4

J5.1–J5.12

37–48

J5.1 DI5, J5.2 DI6, J5.3 DI7, J5.4 DI8, J5.5 DO1, J5.6 DO2, J5.7 DO3, J5.8 DO4, J5.9 DO5, J5.10 DO6, J5.11 DO7, J5.12 DO8

J6.1–J6.6

49, 50

not connected on the CMD-2ED-SA