CMD-2ED-SA, rear view (3D rendering): X axis, Y axis and motor power on the left side panel


Enclosure outline and mounting slots

Enclosure outline: top view with the four base slots; front view with the back wall and its two slots (dimensions in

 mm).

Parameter

Value

Outside dimensions

≈ 127.0 × 104.6 × 31 mm (W × D × H), excluding connectors and plugs

Mounting

4 open slots, 3.8 mm wide (M3), at 118.11 × 82.55 mm; base against the mounting surface

Enclosure

powder-coated aluminium, red

Connector faces (viewed from the front)

front panel: RS485, USB, LED, logic power; left side: X axis, Y axis, motor power; right side: MOTION IO / DIO (Figure 3)

Weight

250 g including the enclosure (measured)

Clearance. Allow space at the front and both sides for the plugs, the motor cables and the J11 cable bend radius. The back wall has no connectors.