Many errors in the Commander core will set flags to alert to the fact that an error occurred.  These error flags can be cleared with use of the CLR ASCII command. For standalone mode, the ECLEAR[axis] command should be used.

This command clears the error flags one axis at a time; there is no command to clear all flags from all axes at once.  These commands only clear the error flags, they do not clear the cause of the error.

ASCII

MTS[axis]

CLR

PS[axis]

Standalone

MTS[axis]

ECLEAR[axis]

PS[axis]


Operation procedure

There is no particular procedure. 


Related commands 

MST, CLR, PS


< Previous SubSection | Topic Home | Home >