10-PIN J3 General I/O (1-10) connector


Pin description:
| 
    Pin #  | 
  
    In/Out  | 
  
    Name  | 
  
    Description  | 
  
    I/F circuit  | 
 
| 
    10  | 
  
    I/O  | 
  
    IO1  | 
  
    General configurable I/O 1  | 
  
    Jumper set to IN Jumper set to OUT and Config to Source Jumper set to OUT and Config to Sinking  | 
 
| 
    9  | 
  
    I/O  | 
  
    IO2  | 
  
    General configurable I/O 2  | 
 |
| 
    8  | 
  
    I/O  | 
  
    IO3  | 
  
    General configurable I/O 3  | 
 |
| 
    7  | 
  
    I/O  | 
  
    IO4  | 
  
    General configurable I/O 4  | 
 |
| 
    6  | 
  
    I/O  | 
  
    IO5  | 
  
    General configurable I/O 5  | 
 |
| 
    5  | 
  
    I/O  | 
  
    IO6  | 
  
    General configurable I/O 6  | 
 |
| 
    4  | 
  
    I/O  | 
  
    IO7  | 
  
    General configurable I/O 7  | 
 |
| 
    3  | 
  
    I/O  | 
  
    IO8  | 
  
    General configurable I/O 8  | 
 |
| 
    2  | 
  
    I/O  | 
  
    IO9  | 
  
    General configurable I/O 9  | 
 |
| 
    1  | 
  
    I/O  | 
  
    IO10  | 
  
    General configurable I/O 10  | 
 
Note:
IN/OUT Jumper should match IOCFG setting. Output configuration resistors are set for sinking current by default.
Mating Connector
Description: 10 pin 0.138" (3.5mm) connector
Manufacturer: On-Shore
Manufacturer Part: OSTTJ1011530
NPA part number: 430-410-10
Note: Other 3.81mm compatible connectors can be used.