In order for CMD-4CR-EV to operate, it must be supplied with at least +12VDC, but not exceed +48VDC. Click on the picture of the connector below to jump to the description of that connector. Power pins and communication pins are displayed and described. Also listed are the recommended mating connector elements, and pre-made cables if available. 


Y axisX axisY EncoderX EncoderX Y MotionHigh Speed I/OConfigurable IOAnalog inputsAnalog adjustRS-485USBPowerConfigurable IOConfigurable IOConfigurable IOZ U MotionU EncoderZ EncoderU axisZ axisCommanderLED Status